Pin It

Red Swan Laser Cut Balsa RC Airplane Kits

With simple plan Hobbyking present Red Swan Laser Cut Balsa RC Airplane Kits. You can build your own rc plane with all material supplied. Here’s another great affordable little balsa Kit for the traditional R/C hobbyist and builder who enjoys constructing models from kit form. The Red Swan is an all built up, 4 channel, electric powered park fly glider. It features sharp accurate laser cut parts that simply slot together with little fuss and the wing looks fantastic when covered with transparent covering to show of the construction. The power system can be a simple small outrunner and 2s battery, using micro servos to keep her nice and light. The resulting model is a great little park fly electric rc plane that performs well, has aileron/elevator/rudder/motor control, yet is tough enough to handle the odd ‘oops!’ moment from novice flyers and compact enough to be transported easily.


Red Swan RC Airplane Kits Specs:

Span: 1250m
Length:  810mm


Red Swan RC Airplane Kits Requires:

4 Channel radio system and 4 x micro servos
1550kv 15amp Outrunner
15Amp Esc
2 or 3s 1300mah Lipo battery
Propeller (8 x 4)
CA glue
Covering film
Basic hobby tools (knife, sand paper etc)


You can get this Red Swan RC Airplane Kits [HERE]

The pictures underneath are some image gallery that related to the Red Swan Laser Cut Balsa RC Airplane Kits in the RC Planes section. If you want to see the high definition quality of the image you can click on the picture you like. I hope you like the Red Swan Laser Cut Balsa RC Airplane Kits article and all image related with it. Please share with your friend and your family may be they need some information related with this post. If you have any suggestion about this post, please feel free to contact me using contact form here.

Ivan November 4, 2015
Copyright © Faipi 2017